The Knife Blade is designed to cut materials much thicker than anything else the Cricut Explore has been able to cut before, even with the Deep Cut blade. Materials can be up to 3/32″ thick. Think chipboard, thick leather, balsa wood, basswood, and more! It’s similar to a super precise X-ACTO knife for your Cricut.
What can the Deep-Point Blade cut?
With the Deep-Point Blade, you can cut most materials up to 1.5mm thickness including Magnet, Chipboard, Stamp material, Thick cardstock, Stiffened felt, Foam sheets, Cardboard and more. The Deep-point blade has a steeper blade angle and harder, more durable steel.
What is Deep-Point Blade used for?
This blade can be used to cut chipboard, rubber stamp material, thick cardstock, stiffened felt, foam sheets, and cardboard. It will cut most materials up to 1.5 mm thick.
Do I need a new housing for deep cut blade?
No. It is recommended only because it is a different color and will not get mixed up with the regular blade. It is the SAME HOUSING in a DIFFERENT COLOR. If you very meticulous and remove your deep cut blade and put it into a labeled container every time you use it, you should have no problem.
Can I cut vinyl with deep point blade?
Jewelry or dog tags: For these projects, you’ll likely want the knife blade to cut through aluminum sheets and the engraving tip to add names and personal information. Vinyl graphics or decals: For thinner vinyl, the fine-point blade may work well, and with thicker vinyl, you can choose the deep-point blade.
What number is the deep point blade?
Item #2002293Details. The Cricut Deep-Point Blade + Housing makes it easy to cut a wider variety of materials for your projects. The Deep-Point Blade has a steeper blade angle (60 degrees vs 45) and harder, more durable steel.
What does the Cricut fine point blade cut?
The Fine-Point Blade cuts light to mid-weight materials cut on a Cricut Joy, including, Cricut Smart Materials, iron in vinyl, adhesive vinyl, cardstock, paper, faux leather, faux suede, Cricut felt, washi, and more.
Can Cricut cut wood?
You can cut either wood on the Cricut Maker machine. Whichever you choose, just make sure it doesn’t have any knots. If a piece as a knot, make sure the knife blade will not have to go through the knot when cutting your pattern. … Obviously, since it’s Cricut-brand basswood, you’ll probably get the best results using it.
How thick can Cricut knife blade cut?
Knife Blade is intended for use with thick, dense materials such as balsa wood, Cricut Chipboard, leather, and craft foam up to 2.4mm or 3/32″. Because of this, Knife Blade will wear quickly compared to other blades.
What is the 30 degree blade used for?
A blade with a 30-degree angle is only capable of making shallow cuts. This blade can only handle film up to 2 millimeters in thickness. However, it is also the only blade that can cut less than 2-millimeter films, so you will need it if you are planning on using these thin films.
What Cricut blade do you need to cut wood?
The Cricut Knife Blade is a tool you can use with your Cricut Maker that cuts through thicker and denser materials such as balsa wood, leather, matboard, and Cricut Chipboard easily.
How deep can the fine point blade cut?
With the Deep-Point Blade, you can cut most materials up to 1.5mm thickness including poster board, heavy cardstock, and more. For use with Cricut Maker and Explore cutting machines (including the Explore, Explore One, Explore Air, and Explore Air 2.)
Which Cricut is best for wood?
Cricut Maker 3 quickly and accurately cuts 300+ materials, from the most delicate paper and fabric to the tougher stuff like matboard, leather, and balsa wood.
What is the deepest cut on a Cricut?
For the Cricut Maker, the thickest material the device can cut is 2.4 mm thick, giving you a greater range of options to choose from.
Is the deep point blade the same as a deep cut blade?
And that is true but, If you look at the blade section on cricut’s website (where it shows you all the blades they make for each machine and what each one is for) the blade is actually called a deep point blade and there is no blade on there called a deep cut blade. People just call them both names.
What blade does the Cricut Explore come with?
Fine Point Blade
The Fine-Point blade comes stock with the Explore Air 2 and Cricut Maker machines. The blade housing is available either gold or silver in color (both are the same). This blade was previously called the Premium German Carbide blade and is the standard blade to use with your machine.
Can Cricut cut Grafix?
Worked perfect for my cricut maker. I used the basswood setting which I saw recommend by many but on that setting my machine seemed to cut it too easy! … I used the basswood setting which I saw recommend by many but on that setting my machine seemed to cut it too easy!
Are Cricut housings interchangeable?
Are Cricut Blades Interchangeable? The Fine Point blade and the Bonded Fabric blade can use the same housing. Also, the QuickSwap tools can use the same housing, so if you already own one, from now on, you only need to get the tip or blade.
What blade do I use for iron-on Cricut?
Premium FINE POINT BLADE.
A fine point blade is great for cutting paper, poster board, card stock, iron-on, vinyl, and other medium-weight materials. This blade is compatible with the Cricut Maker and Cricut Explore.
How long do Cricut blades last?
When asked, “How long do Cricut blades last?”, we think for a guideline you could start with, that at a minimum, you should change your blade every two months with average use of your Cricut machine. If you’re cutting with it quite often, you might need to move that up to every six weeks.