Where Does The Waste From A Macerator Go?

A macerating toilet is an upflush toilet system. It sends waste to a unit behind the toilet in a large container or in a container in the wall. High-powered blades liquefy the waste before it is pumped out of the unit through a pipe that is directly tied to the main drain line.

Can I use a normal toilet with a macerator?

Macerator pumps can be installed behind the toilet pan or in a different location as needed. They can be used with both close-coupled and wall-hung toilets.

Why does my macerator toilet smell?

Why does my Saniflo smell? Bad smells can be due to a build-up of limescale and human waste in the 2-3 inches of water that’s always left in the Saniflo. To see if it’s your Sanilfo that’s emitting the bad smell, flush your toilet or fill your basin with water and then unplug it.

Can you use bleach in a macerator toilet?

It is important never to use products containing bleach in a saniflo macerator as bleach corrodes the seal around the macerator valve. This results in a faulty system as the macerator cannot sense when to open or close.

How noisy is a macerator toilet?

The Saniflo macerator is no louder than a toilet flushing. The sound volume emitted in decibels may vary from one installation to another, depending on the product and especially the surroundings (tiled room or not, size and shape of the room, etc.).

How do you unblock a toilet with a macerator?

To unblock the macerator, a technician will first turn off the power supply. They will then remove the lid of the macerator. The blockage will most likely be toilet paper or other waste that has become stuck in the blade.

Do you need a septic tank with a macerator toilet?

Because that drain line is below the level of the toilet, gravity pulls the contents of the waste line into it. It’s the same with sinks and tubs. … Macerating toilets are safe to use with septic systems.

Does a macerating toilet need to be vented?

Unless you’re using a SaniCOMPACT, which doesn’t require venting, you’ll need to vent the macerator pump into your home’s vent system. This tends to be the biggest surprise with a Saniflo installation, but keep in mind that you can vent the toilet anywhere.

Why does my macerator keeps running?

If the pump keeps randomly firing at different times of the day and night, then it’s likely you have a problem with the microswitch. This could be caused by either a fault with the rubber membrane that activates the switch or it could be that waste is lodged between the switch and the floor.

How far can a macerating toilet pump?

The unit pumps the effluent upward to 15 feet and/or 150 feet horizontally (with gravity fall). Once the water level in the container goes down, the micro switch deactivates the unit until the flush is activated again.

How do you use a toilet without plumbing?

Composting Toilets

A composting toilet is the original toilet without plumbing. Designed to compost waste in a hygienic and environmentally-friendly fashion, these composting toilet systems are popular in both homes and outbuildings. They are good for the environment and they are also known as “dry toilets”.

What is the best macerator to buy?

The 7 Best Saniflo Macerators

  1. SaniPLUS. The SaniPLUS is the most popular macerator in the range, and for good reason. …
  2. SaniPACK Pro. Need to keep your macerating pump out of sight? …
  3. SaniBEST Pro. …
  4. SaniCOMPACT. …
  5. SaniACCESS 3. …
  6. SaniSTAR. …
  7. SaniGRIND Pro.

Can you plunge a macerating toilet?

Things You’ll Need

A macerator grinds solid waste into small enough particles that it can travel through your other waste pipes. Because of this, if you get a clog or blockage in your Saniflo, you cannot simply plunge the toilet to unblock it or you may damage the macerator.

Can you use a plunger with a macerator?

Can you plunge a macerator toilet? If you have a blockage with your Saniflo or macerator toilet it’s not as simple as using a plunger to unblock it. Using a plunger on a macerator toilet could damage the macerator system so if there is a blockage it will need to be taken apart and cleaned.

Do Upflush toilets smell?

The Toilet Smells Bad

Scale develops in the tank over time, and because the tank always has a small amount of water in it, the minerals can mix with waste and cause a foul odor. Upflush toilets should be descaled periodically to prevent this issue.

What is saniflo descaler?

The Saniflo descaler is specifically designed for use with Saniflo units, the cleanser is a concentrated solution for optimum cleaning power and trouble-free maintenance. It comes in a 5 litre bottle for multiple applications and prolongs the life and efficiency of the unit. It won’t damage septic tanks.

How much does it cost to install an Upflush toilet?

Upflush toilets typically cost $600-$800. A professional plumber can usually install one in an hour or two ($100-$200) for a total cost of $700-$1,000.

What size pipe does a macerator use?

Bail out as much water as possible from the cistern. Drain down any vertical discharge pipework and remove discharge hose from elbow. Disconnect any inlet pipes from the unit. Unscrew the 2 fastening screws (to the floor) if fitted.

Can a Saniflo take a washing machine?

In addition to a sink, the Saniswift will also accept and discharge the waste water from a variety of other sanitary fixtures such as: a laundry sink, a shower, a urinal. … The Saniswift can also accept gray water from a washing machine through an indirect connection such as a laundry sink.

What is a Massorator?

Macerators are designed to pump away waste materials from toilets, as well as other waste waters without depending on a regular drainage system. They are often used in bathrooms which are far away from mains drainage systems.

Why is my macerator not working?

If your Saniflo won’t turn off, the likely cause is a blockage in the system. There may be a blockage in the macerator, pump or the waste outlet pipe. Alternatively, there may be a fault with the return valve or damage to the unit’s rubber membrane. Occasionally, this is caused by the microswitch misfiring.